ProLine 1/10 Jaeger HP BELTED F/R 2.8″ MT Tires MTD 12mm/14mm Black G-PRO1029910

Overview

This is a pair of pre-mounted Jaeger HP 2.8″ BELTED All-Terrain Tires Mounted on Raid Black Removable Hex Wheels. Pro-Line has a 2.8″ tire with a low profile that can handle high speeds. Meet the Jaeger HP BELTED 1/10 Monster Truck tire! With its aggressive lateral tread design, this tire has the forward bite you desire, while having a self-cleaning ability. The center of the tread features grooves that allow for flexibility over rough terrain while maintaining stability.

Pro-Line has developed the technology to mold a High-Performance herringbone weave pattern Belt inside of the Jaeger HP tires that will prevent the tire from ballooning or expanding during use. This will give you maximum control to put the power down even at high speeds! The Jaeger HP 2.8″ tires provide the incredible grip that you expect from Pro-Line due to the soft M2 compound and the aggressive tread design. The Jaeger HP comes in at 2.16″ wide and 4.85″ tall and just like all Pro-Line’s tires, they are proudly Made in the USA!

Please note that the Jaeger HP tires have a maximum speed rating that, if exceeded, could result in permanently damaging the internal belt. For the Jaeger HP 2.8″ tires that is 75 mph or about 5,000 RPM. Overrevving your Jaeger HP tires could result in breaking the internal belt, which will NOT be covered under warranty. This can be caused by “diffing out” your tires or holding the throttle open while one, two or three of your tires are stopped, which substantially increases the RPM sent to the free-spinning tire or tires.

The Jaeger HP comes conveniently Pre-Mounted on the Raid 2.8″ Removable Hex Wheel design from Pro-Line! Imagine being able to easily change the offset of your wheel to fit different applications by simply changing out the hex! You can go quickly and easily from the included 12mm narrow offset (2wd Stampede®/Rustler® Rear) to the included 12mm wide offset hexes (2wd Stampede®/Rustler® Front and 4×4 Stampede®/Rustler® Front and Rear) or 14mm wheel hexes (Vorteks™ 3S, Granite™ 3S, Big Rock™ 3S). Also, imagine being able to replace a damaged wheel hex without needing to replace your glued tires (PRO633500 Replacement Hexes). You can even upgrade your wheels to 17mm wheel hexes (PRO633600 Sold Separately)! These Raid 2.8″ wheels accomplish all of this and more by using Pro-Line’s unique 6×30 interlocking hex design that is secured to the wheel by 6 M3 screws that are spaced 30mm across. The built-in adjustability and ease of use make this a must-have wheel for bashers everywhere! Be the first to own the latest and greatest technology from Pro-Line, get the Jaeger HP 2.8″ Belted tires now!

Please note: All tires & wheels are sold in pairs, unless otherwise noted

PRO1029910 | Jaeger HP 2.8″ All Terrain BELTED Truck Tires Mounted on Raid Black 6×30 Removable (12mm & 14mm) Hex Wheels (2) for Vorteks™, Big Rock™ 3S, Granite™ 3S, Stampede® 2WD & 4WD Front and Rear

Stampede® is a registered trademarks of Traxxas® L.P.

Features

Fits