Supplier stock Product is currently available from our supplier and can usually be dispatched within a few days.
- 4.8v to 6.0v
- Motor Type – 3 Pole
- Bearing Type – Top Ball Bearing
- Speed (4.8V/6.0V) – 0.20 / 0.17 sec @ 60 deg.
- Torque kg./cm. (4.8V/6.0V) – 5.2 / 6.4
- Size in Millimetres – 39.88 x 19.81 x 37.85
- Weight grams – 45.08
- Gears – Karbonite
The HS-5485HB is Hitec’s lowest price digital servo and is an excellent choice for sport airplanes up to .60 size. Featuring a programmable digital circuit and our Karbonite™ gear technology that offers four times the strength as our standard nylon gears and after hundreds of thousands of cycles won’t show any signs of wear.
*See Karbonite guidelines below
Applications: Heli’s and Aircraft up to 72” or up to 12lbs when using just one servo per control surface.
Note: Be aware that high vibration gas (not glow) engines combined with large control surfaces and large throws (3D models) can put undue strain on the gears. Metal geared servos are recommended for these applications even if under 12lbs.
Warning: Do not use thread lockers on Karbonite geared servo as it will cause the output shaft to fail.
|Motor Type:||3 Pole|
|Bearing Type:||Top Ball Bearing|
|Speed (4.8V/6.0V):||0.20 / 0.17|
|Torque oz./in. (4.8V/6.0V):||72 / 89|
|Torque kg./cm. (4.8V/6.0V):||5.2 / 6.4|
|Size in Inches:||1.57 x 0.78 x 1.49|
|Size in Millimeters:||39.88 x 19.81 x 37.85|
HS-5485HB Servo Specifications
|Operating Voltage Range (Volts DC)||4.8V ~ 6.0V|
|Speed (Second @ 60°)||0.20 ~ 0.17|
|Maximum Torque Range oz. / in.||72 ~ 89|
|Maximum Torque Range kg. / cm.||5.2 ~ 6.4|
|Current Draw at Idle||10 mA|
|No Load Operating Current Draw||170 mA|
|Stall Current Draw||1,200 mA|
|Dead Band Width||4 µs|
|Dimensions (Inches)||1.57 x 0.78 x 1.49|
|Dimensions (Metric)||39.8 x 19.8 x 38.0|
|Circuit Type||G1 Programable Digital|
|Motor Type||3 Pole Metal Brush Ferrite|
|Bearing Type||Top Ball Bearing|
|Output Shaft (type / Ømm)||Standard 24|
|Dust / Water Resistance||N / A|
|Connector Gauge (AWG) / Strand Count||25 / 40|
3.0kg to 7.9kg
Servo 4.8v, Servo 6v
Only logged in customers who have purchased this product may leave a review.