Introducing the Hobbywing EZRUN MAX10 G2 – 140A Speed Control & 3665SD 2400KV G3 Motor Combo. Compared with the previous generation, the Max10 G2 not only has strong explosive power and stable output power, but also has excellent low-speed linearity . It can not only easily realize violent start-up,
Out of stock Product is not in our store or currently available from our supplier. The item can still be ordered but lead times will vary.
Introducing the Hobbywing EZRUN MAX10 G2 – 140A Speed Control & 3665SD 3200KV G3 Motor Combo.
Compared with the previous generation, the Max10 G2 not only has strong explosive power and stable output power, but also has excellent low-speed linearity . It can not only easily realize violent start-up, straight-line high-speed, flying slopes, but also smooth low-speed walking
It supports turbo timing adjustment up to 32 degrees . It has a significant turbo timing effect when paired with EzRun 3652/3665 G3 , and the maximum speed can be increased by about 25% .
Patented frameless fan + smart start-stop technology The side of the frameless fan has a large flow of air,blowing heat away from the integrated case radiator quickly. Intelligent start-stop technology, intelligent start-stop fan,when the temperature is low, the fan is not activated, reducing noise and saving power; when the temperature rises to a certain level, the fan is activated to effectively dissipate heat.
Dynamic data acquisition As convenient as ever. After connecting the ESC to the OTA Bluetooth module , you can check the throttle, voltage, current, temperature, speed and other data in real time through the mobile APP to know the power running status; you can also grasp the power .
IP67 protection, 24/7 operation The new induction line interface is waterproof design, the overall protection level is IP67 , and it can operate in various climatic conditions and harsh environments. Note: This ESC also supports sensored motors with common interfaces, and you need to purchase an adapter cable to realize it.
Cont./Peak Current – 140A/880A Input Voltage – 2-4S LiPo BEC Output – Switch Mode: 6V/7.4V,5A
Wires & Connectors Input Wires – Red-12AWG-150mm*1 Black-12AWG-150mm*1 Output Connectors – XT60 (Note: All the wire length above is the original length not the length you see from the outside.)
Fan Size – 30x30x10mm Voltage Range – 5-7.4V Powered by – BEC
ESC Programing via SET Button on ESC – Not Supported LED Program Box – Supported LCD Program Box – Supported Program Port – Independent programming port
Reviews
There are no reviews yet.