UDIRC BUG PRO BRUSHLESS UD1608PRO

Description

UDIRC BUG PRO BRUSHLESS UD1608PRO

Introducing from UDI the 1:16 Full Scale High Performance 4WD Racing Speed & Drift BUG Racing Car.

Available in Brushed and PRO Brushless version.

Electronic Stability Program

When the car slides or slips out of control, it can quickly and effectively be corrected in attitude and direction. The function and sensitivity of the gyroscope sensor can be adjusted and turned off by the ESP knob on the transmitter.

High Speed Bearings (Throughout)

The whole vehicle uses ball bearings to improve the mechanical transmission efficiency. With ball bearings, the friction is reduced, the transmission efficiency and power is improved, and mechanical damage is reduced at the same time.

Planetary Differential

High-strength nylon planetary differential (can be upgraded to metal differential), strong and wear-resistant.

2 in 1 Receiver ESC box

• 4CH 2.4G waterproof, dust-proof design
• Electronic Stability Program(ESP)
• Low Voltage Cut Off and Thermal Overload Protection
• Brake, BEC, LVC sensitivity, reverse speed settings

Strong Magnetic Motor

7.4V, 380SM high performance power system

Power Supply

7.4V, 1200mAh rechargeable LiPo battery

Cool Modelling

Control headlight with 3 lights modes.

Two Set of Tyres

RC High Speed/Drift Car. Equipped with two sets of different tyres to suit different reasons and can be replaced easily.

Bodyshell Overview

The bodyshell is made with tough PVC materials and printed in a colourful way!

Metal Bulkhead Hangers

The reinforcement of the metal wishbone hangers enables the car to withstand greater impact.

Model Level Remote Control Transmitter

• 2.4GHz full proportion radio remote control system
• Steering range percentage adjustment
• Electronic stability system (ESP)
• Steering trim
• 4 channel transmitter
• Failsafe protection function
• Speed switch

Technical Specifications

• Assembly time: Less than half an hour
• High Speed Bearings: The whole car
• Battery: Included
• Remote Control Distance: About 50m
• Playing Time: About 15 minutes
• Battery capacity: 7.4V, 1200mAh
• Charger: Include
• Completion Level: Ready-to-run
• Differential: Two oil-filled gears
• Drivetrain: Four Wheel Drive
• Drive Type: Forward/Brake/Reverse
• Final drive ratio: 6.05:1
• Front wheel track: 3.98 inch(101mm)
• Power Type: Electric
• Tooth pitch: 0.5 / 0.7 / 1.0MOD
• Ground Clearance: 0.39 inch(10mm)
• Internal gear ratio: 2.8:1.1
• Motor type: brushed motor/brushless motor
• Gear: 16T
• Product Length: 11.81″(300mm)
• Product Width: 5.91″(150mm)
• Product Height: 3.93″(100mm)
• Product Weight: 635.5g
• Transmitter: Included
• Rear wheel track: 3.98″(101mm)
• Receiver: Included
• Scale: 1/16
• Servo: Included
• Speed controller: Included
• Spur gear: 38T
• Suspension: Independent
• Truck type: Road Racing
• Wheel base: 6.69″(170mm)