FREE Delivery on orders over £150
Call us today on 01322 865 111
10% OFF


Supplier stock Product is currently available from our supplier and can usually be dispatched within a few days.

EAN: 5051121263572 SKU: SEA305G Category:



Seagull P26A Peashooter (26-30CC) 1.8M (71IN) SEA305G

Seagull has done it again with this outstanding 1/5-scale rendition of the ‘tween wars Boeing P-26 Peashooter. Famed for being the first American all-metal production fighter, the P-26 first flew in 1932 but quickly became the victim of rapid progress in aviation. Just three years after its first flight the aeroplane’s wire-braced wings, fixed landing gear and open cockpit were competing with the enclosed cockpit, retract-equipped and aerodynamically clean Curtiss P-36, Messerschmitt 109 and Hawker Hurricane. But what a fabulous subject for an unusual scale R/C model.

Built to Seagull’s usual high standards, beautifully covered and finished, and perfect for any 30cc petrol engine, or glow / electric equivalent, this is a model that has undeniable presence. With the four primary controls, inset flaps and no retracts to worry about, it’s a practical, all-occasion flier, one that any intermediate or experienced pilot will quickly fall in love with.

Key Features

  • Lightweight, high quality balsa and plywood construction.
  • Eye-catching scale colour scheme.
  • Finished in genuine Oracover film.
  • Factory painted fibreglass engine cowl and wheel spats.
  • Large open cockpit encourages additional detail.
  • Removable cockpit hatch for easy radio, tank or flight battery access.
  • Plug-in outer wing panels simplify transportation and storage.
  • Full hardware pack included for either glow or electric power.
  • Numerous scale details including dummy engine and bracing wires.
  • Authentic inset flaps.
  • Crystal clear screw-on windscreen.

What’s in the Box

  • 1x Factory assembled and covered fuselage.
  • 1x Factory assembled and covered 2-piece wing set.
  • 1x Factory assembled and covered tail set.
  • 1x Clear windscreen moulding.
  • 1x Pilot figure.
  • 1x Factory painted glass fibre cowl.
  • 1x Wheel spat set.
  • 1x Comprehensive hardware pack (screws, horns, pushrods, fuel tank etc.).
  • 1x Sprung / steerable tail wheel unit.
  • 1x Oleo-style sprung / braced undercarriage set.
  • 1x Landing and flying wire kit.
  • 1x Comprehensive instruction manual.

Needed to Complete

  • 1 x 26 – 30cc petrol engine, glow engine or electric equivalent.
  • 1 x 6-channel (minimum) computer transmitter and receiver combo.
  • 1 x Propeller to suit your engine / motor.
  • 8x Standard size, digital, metal gear servos.


  • Wingspan (in): 71
  • Length (in): 62.2
  • Wing area (sq. in): 965
  • All-up weight (lb): 14
  • Approx. Flying Weight kg 14lbs
  • Shipping Weight 0.00kg 0.00lbs
  • Product Length 1,580mm 62.2in
  • Product Wingspan 1,800mm 71in
  • Product Wing Area 62dm2 965in2
  • Scale 1:4.7
  • Completion Level ARTF
  • Experience Level Intermediate / Expert
  • Recommended Usage Environment Designated R/C model flying site
  • Material Wood



Aircraft Type








Reviews (0)


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…