FREE Delivery on orders over £150
Call us today on 01322 865 111


Out of stock Product is not in our store or currently available from our supplier. The item can still be ordered but lead times will vary.

EAN: 5028967377329 SKU: F-RMXER030MS Category:




The Ripmax electric retract range is designed to keep retract installations simple and reliable with great value for money. Electric retracts remove all the hassle normally associated with air retract plumbing or getting a mechanical linkage to fit exactly.

This mains retract set includes two retract units that have pre-installed 5mm diameter studs for use with oleo legs and is suitable for models with a maximum weight of 5kg.

These retracts can be used in both electric and engine powered models. They are designed to primarily use the power supplied through the receiver. This can come from the battery in the case of engine models, or a BEC system in electric models. If you use heavier wheels/legs or have lots of drag on the leg doors, then current consumption is increased. If you have any doubt of the power available then you can use a separate battery supply for the retracts using one of the special ‘Y’ leads (Part: P-CFCYLG and P-CJCYLG).

Each unit has built-in over-current protection. If the leg is stopped in any way during movement, or the load is too high to protect the retract from damaging or drawing too much current.


Leg Wire:5mm
Max Weight:5kg
MountPlate:43 x 44
Stall Current:1.2 to 1.4A
Voltage:4.8 – 6.0v
Torque:2.90 kg/cm @ 4.8v
Torque:3.10 kg/cm @ 6.0v
Dimensions:74 x 44 x 28
Gear Type:metal
Speed:0.80 secs @ 4.8v
Speed:0.60 secs @ 4.8v







Reviews (0)


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.