FREE Delivery on orders over £150
Call us today on 01322 865 111
10% OFF

£33.25

In stock Product is on the shelf in our store and can usually be dispatched the same day if ordered before 14:30, or collected from the store once order confirmation is received

EAN: MAC5921HV SKU: MAC5921HV Category:

Description

Description

MacGregor MG5921HV

Features:

  • High performance high voltage coreless digital servo
  • High torque and high speed
  • High-precision metal gears with hard anodising
  • Dual Bearing Support
  • Metal centre case to act as a heat sink
  • JR style lead and plug
  • 25 tooth spline (Futaba style)
  • Waterproof

Overview

MacGregor MG5921HV is part of MacGregor’s new range of high voltage digital servos. This high voltage, high torque servo has been designed for use with large scale & aerobatic aircraft.

Battery chemistries such as Li-Po, Li-Ion, and Li-Fe have become very popular within the RC community. They are the standard for powering electric motors and have also gained popularity as receiver battery packs. The issue is the output voltage of these batteries is higher then the previous standard 4 – and 5-cell NiCd and NiMH packs, 4.8V and 6V respectively. The higher voltage is not an issue with the receivers but can be for the servos. Many servos will not operate at these higher voltages for very long before burning out the motors or electronics.

To get around this issue modellers have had to use a regulator to drop the voltage to an acceptable operating range for their servos, usually around 5 to 6 volts. The addition of a regulator adds a component that, should it fail, can cause the loss of a model.

MacGregor’s HV servos are designed with motors and electronics that operate off the direct voltage of a 2-cell Li-Po, Li-Ion, or Li-Fe receiver battery pack. This eliminates the need for a regulator and lowers the chance for a power failure that can cause a catastrophic failure of your model. Also note that the HV servo specs are shown at the higher voltage (8.4V 2S LiPo) but will still operate on a standard 5-cell 6V NiCd, Ni MH battery with a reduction in performance of approximately 10% in speed and torque.

Specifications:

Dead band:1µs
Working frequency:1520µs / 330hz
Motor:Coreless Motor
Operating Speed (6.0V):0.152sec/60°
Operating Speed (8.4V):0.123sec/60°
Stall Torque (6.0V):17.25 kg.cm (239.55oz/in)
Stall Torque (8.4V):20.32 kg.cm (281.89 oz/in)
Dimensions:40.5 x 20.5 x 36.5mm /1.59 x 0.80 x 1.43in
Weight:59.3g (2.09oz)
Connector Wire Length:265 mm (10.43in)
Bearing:2BB

Specification

Specification

Servo Power

15.0kg to 24.9kg

Servo Voltage

Servo 6v, Servo 7.4v

Servo Operation

Digital Servo

Brand

MacGregor

Gear Material

Metal Gear

Servo Size

Standard

Reviews (1)

1 review for MacGregor MG5921HV 20.3Kg High Voltage Servo

  1. James

    Great upgrade for my Aarma outcast steering servo. Feels like a different car to drive. fast and stronger than the standard one.

Only logged in customers who have purchased this product may leave a review.