15% OFF
Original price was: £19.99.£16.99Current price is: £16.99.
In stock Product is on the shelf in our store and can usually be dispatched the same day if ordered before 14:30, or collected from the store once order confirmation is received
Description
Description
JR SERVO DS588 HV
DS588HV Standard/Popular Type High Voltage Digital Servo.
Battery chemistries such as Li-Po, Li-Ion, and Li-Fe have become very popular within the RC community. They are the standard for powering electric motors and have also gained popularity as receiver battery packs. The issue is the output voltage of these batteries is higher then the previous standard 4 – and 5-cell NiCd and NiMH packs, 4.8V and 6V respectively. The higher voltage is not an issue with the receivers but can be for the servos. Many servos will not operate at these higher voltages for very long before burning out the motors or electronics.
To get around this issue modelers have had to use a regulator to drop the voltage to an acceptable operating range for their servos, usually around 5 to 6 volts. The addition of a regulator adds a component that, should it fail, can cause the loss of a model.
JR’s HV servos are designed with motors and electronics that operate off the direct voltage of a 2-cell Li-Po, Li-Ion, or Li-Fe receiver battery pack (6.6V to 7.4V nominal voltage). This eliminates the need for a regulator and lowers the chance for a power failure that can cause a catastrophic failure of your model. Also note that the HV servo specs are shown at the higher voltage (7.4V 2S LiPo) but will still operate on a standard 5-cell 6V NiCd, Ni MH battery with a reduction in performance of approximately 10% in speed and torque.
Specifications:
Torque: 4.2Kg.cm (6.0v) / 5.2Kg.cm (7.4v)
Speed: 0.26s/60° (6.0v) / 0.21s/60° (7.4v)
Weight: 42g
Dimensions: 35.5 x 19 x 38.5mm
Operation Voltage: 6.0V – 8.5V
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Related products
- 52% OFF
BLADE BCX2 INNER SHAFT W/HEAD HUB –
Original price was: £13.43.£6.49Current price is: £6.49. Add to basketIn stock Product is on the shelf in our store and can usually be dispatched the same day if ordered before 14:30, or collected from the store once order confirmation is received
0 reviews - 18% OFF
BLADE BCX2 MAIN FRAME SET – EFLH1254
Original price was: £13.43.£10.99Current price is: £10.99. Add to basketIn stock Product is on the shelf in our store and can usually be dispatched the same day if ordered before 14:30, or collected from the store once order confirmation is received
0 reviews - 77% OFF
BLADE Canopy Mounting Grommets (8): 120SR – BLH3121
Original price was: £7.50.£1.75Current price is: £1.75. Add to basketIn stock Product is on the shelf in our store and can usually be dispatched the same day if ordered before 14:30, or collected from the store once order confirmation is received
0 reviews - 10% OFF
BLADE MCX SERVO PUSHROD SET – EFLH2218
Original price was: £8.99.£8.09Current price is: £8.09. Add to basketIn stock Product is on the shelf in our store and can usually be dispatched the same day if ordered before 14:30, or collected from the store once order confirmation is received
0 reviews
Reviews
There are no reviews yet.