CEN

CEN 2025 M-Sport Ford Puma Rally1 1/8 RTR Brushless CEN9001

Original price was: £479.99.Current price is: £407.99.Save £72.00

In stock Product is on the shelf in our store and can usually be dispatched the same day if ordered before 14:30, or collected from the store once order confirmation is received

Description

Description

CEN 2025 M-Sport Ford Puma Rally1 1/8 RTR Brushless CEN9001

Features

  • 100A WP-MAX10-SCT-100A-3S RTR Sensor-less with T-Plug (Powered by HobbyWing).
  • 2-3S Li-po (Lithium-polymer) or 6-9 Cell Ni-Mh Batteries.
  • Water-Proof and Dust-Proof for All Weather.
  • Super Internal Switch-Mode BEC with 6V / 7.4V for Usage with High Voltage Servo.
  • Built-In Capacitor Module.
  • Automatic Throttle Range Calibration.
  • Low Voltage Cut-Off Protection for Li-Po and NiMH Battery.
  • Over-Heat Protection and Throttle Signal Loss Protection.
  • 5 Levels of acceleration/punch.
  • 9 Levels of maximum brake force.

Specifications
Motor

  • CEN Racing High Performance 3658 3000KV Brushless Motor (Sensorless).

Servo

  • 12Kg Metal Gear Servo (By Savox).
  • 4.8V – 0.26 sec/60° 10.0 kg-cm.
  • 6.0V – 0.23 sec/60° 12.0 kg-cm.
  • With 25T Horn Gear Spline.

Radio System

  • AMP-30 TX 3-Channel Transmitter.
  • Frequencies: 2.4GHz.
  • Digital Trimming.
  • Steering Dual-Rate (ST D/R) Adjustment.
  • End Point Adjustment (EPA).
  • Build in Failsafe.
  • Power Supply: 4 – AA Alkaline (Not Included).
  • AMP30 RX 3-Channel Receiver.
  • Frequency: 2.4GHz.
  • Power Supply: DC 4.8 ~ 6.0V.
  • Dimensions: 1.35” (L) x 0.72” (W) x 0.53” (H).

Body

  • Official Licensed 2024 M-Sport Ford Puma Rally 1 Edition.
  • Fully Detailed Injection-Molded Body Accessories Body Details.
  • Size: Length 20.08inches (510mm) / Width 9.45 inches (240mm).

Chassis

  • 3mm Aluminium Chassis.
  • Front and Rear 3mm Aluminum Shock Towers.
  • Aluminum Arm Brace.
  • Full Precision Ball Bearing Support.
  • Wider Body Mount Positions for Better Support.
  • Front Skid plate with Durable Foam Bumper.
  • Injection-Molded Rear Diffuser.
  • Easy Access Battery Tray.
  • Battery Tray Size 142mm x 48mm.
  • Chassis Length:  18.11 inches (460mm).
  • Chassis Width:   9.06 inches (230mm).
  • Wheelbase:  11.80 inches (300mm).
  • Ground Clearance: 0.98 inches (25mm).

Suspension

  • Aerodynamic Lower Arm Suspension Design.
  • Big Bore Oil Filled Adjustable Coil Over Shocks.
  • 12mm Over Size Shock Body with 3mm Hardened Steel Polished Shaft.
  • Racing Spring.
  • Adjustable Turnbuckles.
  • Adjustable Wheelbase +/- 6mm.

Gear Ratio

  • Spur / Pinion 46/14T 3.29:1.
  • Ring & Pinion 40/17T 2.35:1.

Drivetrain

  • Full Time 4-Wheels Drive.
  • Center Shaft Drivetrain for more power transferred to the wheels.
  • Metal Transmission Gears
  • Aluminium Adjustable Motor Mount.
  • Oil Filled Two Differential Drive System.
  • Center Direct Drive.
  • Hight Efficient Transmission System.
  • 6 Gear Bevel Gear Type Differential.
  • Front / Rear Harden Steel Dog Bone and outdrives.

Wheels

  • High Impact & Light Weight WRC Racing Wheel 56 X 35.50 mm.

Tyres

  • High Performance Racing Rubber Compound Tires 56 x 80 x 35.50 mm.

Specification

Specification

Assembly

ARTR (Almost Ready to Run)

Brand

CEN

Drive

4wd

Motor Type

Brushless

Scale

1:8

Surface type

Off road, On road, Rally

Reviews

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

SKU: CEN9001 Categories: , ,