Product filters

Staufenbiel DHC-2 Beaver 1520mm PNP

Loading Zoom, please wait
Staufenbiel DHC-2 Beaver 1520mm PNPStaufenbiel DHC-2 Beaver 1520mm PNPStaufenbiel DHC-2 Beaver 1520mm PNPStaufenbiel DHC-2 Beaver 1520mm PNPStaufenbiel DHC-2 Beaver 1520mm PNPStaufenbiel DHC-2 Beaver 1520mm PNPStaufenbiel DHC-2 Beaver 1520mm PNPStaufenbiel DHC-2 Beaver 1520mm PNPStaufenbiel DHC-2 Beaver 1520mm PNPStaufenbiel DHC-2 Beaver 1520mm PNPStaufenbiel DHC-2 Beaver 1520mm PNPStaufenbiel DHC-2 Beaver 1520mm PNP

Product Description

The original DHC-2 Beaver is used as a transport plane, most frequently in Canada. Without a doubt, the model of the BEAVER, with readily installed electronics and extremely short assembly time, is one of the most nicely done replicas of this plane type.e. Besides functional landing flaps, the DHC-2 BEAVER has an attractive lighting set. Furthermore, the model can be equipped optionally with floats and a sound module, which plays the sound of a radial engine. Whether on the ground or in the air – this model is a real eye-catcher on any flying field or on any waters!

Strong flight pattern
The model is equipped with a Brushless direct drive and supplied by a 3S LiPo, which facilitates a very strong flight pattern of the plane that is true to the original. With its strong drive power, the DHC-2 BEAVER also demonstrates powerful and sleek performance, even in windy conditions.

Robust & stable
The DHC-2 BEAVER is made of robust EPO rigid foam material and has high strength values with surprisingly minimal weight. If, for some improbable reason something unexpected were to happen to the model, minor damages can be repaired quickly and easily with instant glue.

Landing lights & position lights
Functional landing lights come already preinstalled in the two wings. In addition, read and green position lights are installed on the winglets and on the upper side of the fuselage. Its functional landing flaps and colours that are true to the original, lend this model a particularly authentic appearance.

Electronics installed & wired
All electronic components come already installed in the model. Just take it out of the box and it's ready to fly!. Besides the Brushless engine, the 40A controller and position and landing lights, 5 micro servos for pitch elevators, yaw rudders and ailerons in all are already completely installed and wired. 

Optional float set & sound module available
Those planning on testing out the BEAVER and have it, much like its original predecessor, take off and land on water, can use the float set, which comes availably separately. The model can also be steered on water, thanks to its controllable water rudder, which is controlled with the yaw rudder. The floats can be changed for the landing gear in just a few easy steps. What's more, a matching sound module that replicates the sound of a radial engine, is available.

Features

  • PNP model with installed motor, ESC, servos and lighting set
  • Strong and authentic flight pattern
  • Comfortable flight characteristics
  • High-performance Brushless drive for 3S LiPos
  • Functional landing flaps installed
  • Functional landing lights and position lights installed
  • Coloured moulded components and decorative details applied
  • Floats and sound module available optionally
  • Quick and simple assembly
  • Installation instructions with lots of pictures in German, English and French
Specification:
Wingspan approx.: 1520 mm
Fuselage length approx.: 960 mm
Wing area approx.: 28,0 dm²
Weight (ready to fly): 1200 g
Type of construction/material wing: EPO
Type of construction/material fuselage: EPO
Box contents:
Accesories built-in/included: built-in
Motor: Brushless
ESC: Hobbywing 40 A (LiPo Deans connector)
Servos: 5x Micro 9g
Propeller: 12 x 6
Spinner: incl.
Landing gear: incl.
Others: LEDs
RC-Function/accessory recommendation:
Aileron: 2x 9g (incl.)
Elevator: 1x 9g (incl.)
Siderudder: 1x 9g (incl.)
Airbrakes: 1x 9g (incl.)
Motor: 1x 40A (incl.)
Needed to complete:
Radio: min. 5-Channel
Receiver: min. 5-Channel
Batteries: LiPo 2200mAh 3S
Charger: DYMOND Power 80 or equivalent
Ref: 0314302 Stock Status: pre-order Manufactured by: Staufenbiel

Stock Levels

Online
In store

Price £149.99

Price Match

Product Reviews

There are currently no reviews for this product. Be the first to Write a review.

SiteWizard.co.uk Website Design & eCommerce Solutions
Google Analytics Alternative