Product filters

Multiplex Cockpit SX 9 with RX-9-DR M-LINK

Loading Zoom, please wait
Multiplex Cockpit SX 9 with RX-9-DR M-LINKMultiplex Cockpit SX 9 with RX-9-DR M-LINKMultiplex Cockpit SX 9 with RX-9-DR M-LINKMultiplex Cockpit SX 9 with RX-9-DR M-LINKMultiplex Cockpit SX 9 with RX-9-DR M-LINKMultiplex Cockpit SX 9 with RX-9-DR M-LINK

Product Description

With the Cockpit SX 9 channel M-LINK radio control system – it’s never been easier.  This set is 100% developed and built in Germany with touch-screen programming.

 

The MULTIPLEX COCKPIT SX9 is a development of the popular and proven seven-channel RC system for the forward-looking beginner and the demanding leisure pilot.

  • Full-colour TFT touch-screen Efficiently arranged transflective full-colour 3.5" touch-screen, 320 x 240 pixels, with informative symbols and large, clearly legible numbers and letters.
  • Legible in sunlight without backlighting: perfect for modelling. Automatic day / night switching for extreme power-saving when used outdoors. Up to 24 hours transmitter operating time possible.
  • New Model Assistant: the key to simple, comprehensive programming facilities

The set is very intuitive to use thanks to an ingenious touch-screen design with clearly arranged displays and many self-explanatory graphics. There's a convenient Model Assistant with extensive facilities for altering values using the touch-screen. Ultra-simple adjustments using a slider, direct value input using the alpha-numeric keypad, and +/- buttons for fine-tuning, ensuring ultra-simple programming of your models.

  • Super-convenient model memory management

The COCKPIT SX9 features 200 individual internal model memories; the memories are stored on the internal SD card in .xml format, making it an easy, convenient matter to manage model memories on your PC using USB memory media.

  • Superlative speech output
  • With more than 450 words, numbers and phrases it is one of the most advanced systems of its type ever to have been incorporated in a hand-held transmitter

The system keeps Cockpit SX9 pilots aware of critical telemetry data and transmitter functions without having to take their eyes from the model. When necessary, the Cockpit SX9 gives audible "voice" reminders of specific sensor values to you. If an alarm should be triggered, you don’t have to look at the screen to see what’s happened: the Cockpit SX9 tells you.

Downlink channel / Telemetry

If a telemetry-capable receiver is employed, the actual voltage of the receiver power supply is displayed on the transmitter’s integral screen. If the voltage falls below a (user-variable) minimum value, an audible signal is emitted as a warning that the receiver battery is almost flat. The radio link quality (LQI) can also be displayed on the transmitter screen as a percentage value - without requiring a sensor.

An additional safety advantage!

  • It is also possible to display up to eight telemetry values from the model - depending on the sensors connected to the receiver, e.g. battery voltage, current, temperature, etc. - on the screen. Typical uses: motor temperature, flight pack voltage, motor current drain.
  • The telemetry data can be stored in the model using the optional MULTIPLEX FlightRecorder (# 8 5420).
  • Freely configurable on-screen display of sensor values, dynamic display adjustment
  • Wireless Trainer mode operations

In its standard form the COCKPIT SX M-LINK can operate both as Teacher and Pupil transmitter. The other transmitter - Pupil or Teacher - can be any M-LINK transmitter with Trainer facilities. The optional COPILOT module (# 4 5184) is required for Trainer mode operations. The COCKPIT SX provides selective Trainer mode. This allows full control transfer to the trainee or - depending on the trainee’s skill level - the transfer of individual control functions. The Teacher can resume control of the model simply by moving the sticks.

Dual-Rate and Expo can be set up separately for each flight phase

For three axes (aileron, elevator, rudder) plus Expo for throttle.

3 timers

  • Timer 1: mm:ss Selectable Start / Stop switch, alarm function, speech output, vibration
  • Timer 2: mm:ss Selectable Start switch, alarm function, speech output, vibration
  • Timer 3: hh:mm Transmitter operating hours timer

Future-proof software updates

MULTIPLEX is constantly working on further development of the Cockpit SX software. You can update your transmitter at any time, so that it always reflects the latest state of development, using MULTIPLEX Launcher and the www.multiplex-rc.de website - at no charge.

KEY FEATURES

LiFe battery, 3.3 V /4000 mAh
SD card slot - Micro SD card for Video and Image storage(not included)
4 proportional transmitter controls
3 x 2-position switch, short
1 x 3-position switch, short
2 x momentary button

WEIGHT

1.5500

Ref: 2525161 Stock Status: 100000 Units in Stock Manufactured by: Multiplex

Stock Levels

Online
In store

Price £448.90

Please Choose:

Manufacturer


Price Match

Product Reviews

There are currently no reviews for this product. Be the first to Write a review.

SiteWizard.co.uk Website Design & eCommerce Solutions
Google Analytics Alternative